Hebei Hong'an Fire Door Co., Ltd. is one of the most reliable manufacturers and suppliers of selection analysis for hospital ward doors in China. If you're going to buy durable selection analysis for hospital ward doors made in China, welcome to get free sample from our factory. All customized products are with high quality and low price.
Main Board Materials for Ward Doors and Their Application Scenarios

Ⅰ.The first type is galvanized steel medical doors. The base material is galvanized steel sheet with antibacterial powder coating on the surface, and honeycomb paper or rock wool filled inside. It features high strength, impact resistance and good dimensional stability. It can withstand repeated wiping with disinfectants and resists moisture and mildew, making it the most widely used option for general hospital wards. When purchasing, pay close attention to steel plate thickness. If the sheets for door frames and door leaves are under‑thick, dents and deformation will occur after long‑term impact. The coating must be medical antibacterial electrostatic powder coating. Ordinary paint will fade and peel when exposed to chlorine‑containing disinfectants.
Ⅱ.The second type is door leaves with HPL fire‑resistant antibacterial boards (compact laminate). The substrate is usually wood composite or multi‑layer board, with hot‑pressed antibacterial compact laminate on the surface. It has rich color options, soft texture, light weight and low opening/closing noise, suitable for pediatric and rehabilitation wards. Its disadvantage is that the substrate cannot withstand long‑term soaking. It should be used cautiously in humid wards or wards next to restrooms. Attention shall also be paid to edge sealing. Once the seal cracks, water vapor seeps in and causes blistering and delamination easily.
Ⅲ.The third type is PVC laminated medical doors with lower cost, mostly used in township health centers and simple wards. Although the PVC film surface is easy to wipe, it has poor resistance to chemical disinfectants. It tends to age and warp after frequent disinfection with 84 disinfectant or alcohol, and its antibacterial performance is limited. It is not recommended for tertiary hospitals and infection wards. For all board types, priority shall be given to materials with antibacterial test reports covering common pathogenic bacteria such as Escherichia coli and Staphylococcus aureus, instead of merely relying on suppliers' verbal claims.
Ⅳ.Antibacterial hardware is an easily overlooked key point. Ordinary hardware rusts easily in hospital environments with frequent disinfection. Door handles are high‑contact points for cross‑transmission of pathogens. Common hardware for ward doors includes door handles, hinges, locks, bump stops and door closers. 304 stainless steel antibacterial hardware is preferred; some high‑end versions adopt copper‑based antibacterial coating to inhibit bacterial adhesion on the surface. 201 stainless steel or ordinary iron hardware is prohibited. Such hardware will develop heavy rust spots quickly, impair appearance and raise nosocomial infection risks.
Hot Tags: selection analysis for hospital ward doors, China selection analysis for hospital ward doors manufacturers, suppliers, factory, fire door, fire rated hinged door, fire rated plant room door, fire rated single leaf door, fire rated steel hinged door, fire smoke rated door
